American Black Walnut Oiled and Lacquered Fitted in various locations
...more info

WOCA Wood Floor Maintenance Kits
...more info

Micro Bevel and Square Edged Wood Flooring
...more info

Personal Quotation for Wood Flooring and Hardwood Flooring
...more info

WOCA Oiled Finished Wood Flooring
...more info

Installing Underfloor heating and Wood floors
...more info

Parquet Wood Flooring for use with underfloor heating


Adhesives For Engineered Wood Flooring
...more info

Sub Floors and their inherent problems for wood flooring
...more info

WOCA Oils from Wood Care Denmark with Natural Oil
...more info

Brushed and Oiled Dark Oak Floors

Brushed Black Oak Floor 150mm Wide ( DIAMOND-E342LN )


This is a select grade board with few knots and the grading is ABC. Call 01666 504015 for more information.


Width: 150mm with a micro bevel
Thickness: 20mm tongue and groove all 4 sides
Top Layer: 4mm Solid Oak
Base layer: 16mm thick 9 layers of crossply birch
Length: 1860mm with one split board
Quantity per Carton:1.674
Finish: Bona Industrial matt lacquer 9 coats see details below
Applications: Home, Office, Pubs, Clubs and Commercial use

Floor Fitting Options
Nailing:Secret Nailing or Secret Screws
Gluing: Use the Bona R850 adhesive to glue directly to screed or floors
Floating:On an underlay where the tongue and grooves are glued together
Underfloor Heating:Is suitable but always glue to the screed if possible

      

Using the recommended care kit correctly will ensure your flooring will remain pristine and provide a lifetime of enjoyment.

Bona Cleaning Kit for regular maintenance
 
 

Brushed Black Oak Floor 150mm Wide



We supply real wood flooring at truly economical prices and deliver Nationwide including Europe and Ireland. This board has been lightly brushed removing the softer grain (the perfect floor for pets) to give the surface a texture that makes the floor look and feel more natural. Our engineered boards are not like the cheap versions where you get a mixture of birch and softwood, or where there are just two thin layers of birch and a thick centre layer of softwood like pine or poplar. Engineered wooden flooring does not need to be acclimatised like solid wood and can be laid immediately after delivery.

 All our engineered boards have multi cross ply layers of Birch for strength and stability and are structural boards which means they can be laid directly over joists. The boards are tongue and groove all round. Our Engineered boards look like solid boards but are much stronger due to their structure and the manufacturing process we use.

All our engineered boards have multi cross ply layers of Birch for strength and stability and are structural boards which means they can be laid directly over joists. The boards are tongue and groove all round. Our Engineered boards look like solid boards but are much stronger due to their structure and the manufacturing process we use.

This is a Lacquered Floor and we use the Bona Natural for industrial applications and apply 9 coats. The process is as follows and we have quoted the product codes for clarification:

1.     One coat of UV Primer UW0310 this gives good adhesion and is cured using IR drying Lamps

2.     Three coat of UV curing light filler UL0115  giving high abrasion resistance

3.     One coat of UV Base coat (anti-scratch) UB0135 cured with a UV lamp

4.     One coat of Bona Natural base coat UB8128 cured with a UV lamp

5.     One coat of UV Base coat UB0123 cured with a UV lamp

6.     Two coats of Bona Natural Top coats UT8098 cured with Mercury lamps and this top coat has a high resistance to scratching due to its industrial strength.

 

 Engineered wooden flooring boards are used in environments where stability is required and moisture could be prevalent, but it must not exceed 10%. For example you should use these on new concrete floors subject to the correct moisture level, over garages, basements etc. Due to the cross ply structure, these boards will not move like solid wood.