Brushed Limed UV Lacquered Oak 189mm Wide ( DIAMOND-E360LN )

We supply real wood flooring at truly economical prices and deliver Nationwide including Europe and Ireland. Our engineered boards are not like the cheap versions where you get a mixture of birch and softwood, or where there are just two thin layers of birch and a thick centre layer of softwood like pine or poplar. Engineered wooden flooring does not need to be acclimatised like solid wood and can be laid immediately after delivery.

All our engineered boards have multi cross ply layers of Birch for strength and stability and are structural boards which means they can be laid directly over joists. The boards are tongue and groove all round. Our Engineered boards look like solid boards but are much stronger due to their structure and the manufacturing process we use.

This is a Lacquered Floor and we use the Bona Natural for industrial applications and apply 9 coats. The process is as follows and we have quoted the product codes for clarification:

1.     One coat of UV Primer UW0310 this gives good adhesion and is cured using IR drying Lamps

2.     Three coat of UV curing light filler UL0115  giving high abrasion resistance

3.     One coat of UV Base coat (anti-scratch) UB0135 cured with a UV lamp

4.     One coat of Bona Natural base coat UB8128 cured with a UV lamp

5.     One coat of UV Base coat UB0123 cured with a UV lamp

6.     Two coats of Bona Natural Top coats UT8098 cured with Mercury lamps and this top coat has a high resistance to scratching due to its industrial strength.

Engineered wooden flooring boards are used in environments where stability is required and moisture could be prevalent, but it must not exceed 10%. For example you should use these on new concrete floors subject to the correct moisture level, over garages, basements etc. Due to the cross ply structure, these boards will not move like solid wood.