Hard Wood Flooring for Pubs, Clubs and Restaurants

Personal Quotation for Wood Flooring and Hardwood Flooring
...more info

Installing Underfloor heating and Wood floors
...more info

American Black Walnut supplied oiled and fitted by The Solid Wood Flooring Company
...more info

Wood Flooring Sustainability
...more info

Wood Floors and Under Floor Heating
...more info

Technical Specification Documents
...more info

WOCA Wood Floor Maintenance Kits
...more info

Wood Flooring Fitted Pictures
...more info

Sub Floors and their inherent problems for wood flooring
...more info

WOCA Oils from Wood Care Denmark with Natural Oil
...more info

Hard Wood Flooring for Pubs, Clubs and Restaurants

Brushed Smoke Oak Floor ( AMETHYST-E124 )


This hardwood floor has been brushed and then fumed in an oven to harden it. The colour is neutral and is very contemporary. The grading is ABCD with colour variation. Call 01666 504015 for more information

Width: 189mm with a micro bevel
Thickness: 20mm tongue and groove 4 sides
Top Layer: 6mm solid oak
Base layer: 14mm thick 9 layers of cross plywood Birch
Length: Fixed Length 2200mm with one board in each carton split
Quantity per Carton:2.079 m2 and 5 layers
Finish: WOCA UV Oil Smoke colour
Applications: Home, Office, Pubs, Clubs and Commercial use

Floor Fitting Options
Nailing:Secret Nailing or Secret Screws
Gluing: Use the Bona R850 adhesive to glue directly to screed or floors
Floating:On an underlay where the tongue and grooves are glued together
Underfloor Heating:Is suitable but always glue to the screed if possible

The accessories and items below also match this floor and will ensure you have a lifetime of enjoyment.

WOCA Natural UV Oil maintenance kit                                         

Solid Oak accessories as shown below

Accessories product codes: STN203, END203, FACE201, TM303, SK111, SK121, SN100, TR101


Brushed Smoke Oak Floor



We supply real wood flooring at truly economical prices and deliver Nationwide including Europe and Ireland. This board has been lightly brushed removing the softer grain (the perfect floor for pets) to give the surface a texture that makes the floor look and feel more natural. Our engineered boards are not like the cheap versions or where there are just two thin layers of birch and a thick centre layer of softwood like pine or poplar. Engineered wooden flooring does not need to be acclimatised like solid wood and can be laid immediately after delivery.

All our Amethyst engineered boards have multi cross ply layers with Birch for strength and stability and are structural boards which means they can be laid directly over joists. The boards are tongue and groove all round. Our Engineered boards look like solid boards but are much stronger due to their structure and the manufacturing process we use.

UV Oiled Floors - we apply 3 coats at the factory and cured using infra red heat to ensure a very hard wearing surface that can easily be repaired. We use the WOCA UV oil and also supply maintenance kits with paste and soap oil for cleaning.

Engineered wooden flooring boards are used in environments where stability is required and moisture could be prevalent, but it must not exceed 10%. For example you should use these on new concrete floors subject to the correct moisture level, over garages, basements etc. Due to the cross ply structure, these boards will not move like solid wood.