Personal Quotation for Wood Flooring and Hardwood Flooring
...more info

Parquet Wood Flooring for use with underfloor heating


Wood Floors and Under Floor Heating
...more info

WOCA Wood Floor Maintenance Kits
...more info

Fitting Wood Floors beneath Skirting Boards
...more info

American Black Walnut Oiled and Lacquered Fitted in various locations
...more info

Sub Floors and their inherent problems for wood flooring
...more info

Wood Flooring Sustainability
...more info

Installing Underfloor heating and Wood floors
...more info

EAZY FIT Parquet Flooring fitting costs
...more info

Engineered Oiled Walnut 190mm Wide

Engineered Oiled Walnut 190mm Wide ( SAPPHIRE-E502 )


This is a typical American Walnut floor with knots, burr, grain and character. The grading is ABCD. Call 01666 504015 for more information.

Width: 190mm with a micro bevel
Thickness: 21mm tongue and groove all 4 sides
Top Layer: 6mm solid walnut
Base layer: 15mm thick 9 layers of cross grain plywood
Length: 1860mm with one board per carton split
Quantity per Carton:1.4136 m2 and 4 layers
Finish: WOCA Natural Oil
Applications: Home, Office, Pubs, Clubs and Commercial use

Floor Fitting Options
Nailing:Secret Nailing or Secret Screws
Gluing: Use the Bona R850 adhesive to glue directly to screed or floors
Floating:On an underlay where the tongue and grooves are glued together
Underfloor Heating:Is suitable but always glue to the screed if possible

Click here to see an example of our walnut fitted the only difference is 4mm or 6mm top layer
 
The accessories and items below also match this floor and will ensure you have a lifetime of enjoyment.           

WOCA Natural Oil Maintenance Kit                                         

Solid Walnut accessories as shown below

Accessories product codes: STN208, END208, TM308, TR105, SN105


Engineered Oiled Walnut 190mm Wide



We supply real wood flooring at truly economical prices and deliver Nationwide including Europe and Ireland. Our engineered boards are not like the cheap versions where there are just two thin layers of birch and a thick centre layer of softwood like pine or poplar. The Engineered wooden flooring does not need to be acclimatised like solid wood and can be laid immediately after delivery.

 All our engineered boards have multi cross ply layers of Birch for strength and stability and are structural boards which means they can be laid directly over joists. The boards are tongue and groove all round. Our Engineered boards look like solid boards but are much stronger due to their structure and the manufacturing process we use.

 

Natural Oiled Floors we use the WOCA Woodcare Denmark products for all our oiled floors and apply 2 coats at the factory. You can then use the master Oils to give the floor a deeper finish using a polishing mop and patina discs after it has been laid. We supply the WOCA maintenance oil and oil soap for cleaning.

 

Engineered wooden flooring boards are used in environments where stability is required and moisture could be prevalent, but it must not exceed 10%. For example you should use these on new concrete floors subject to the correct moisture level, over garages, basements etc. Due to the cross ply structure, these boards will not move like solid wood.