Brushed & Oiled Oak Flooring
Long & Wide Oak Flooring
Solid Oak Floor
Unfinished Wood Flooring
Blanchon Light Oils and Hard Wax Wood Floor Colours
WOCA Light Oiled Oak Floor Colours
Parquet Wood Flooring for use with underfloor heating

WOCA Oiled Finished Wood Flooring
...more info
Installing Underfloor heating and Wood floors
...more info
Micro Bevel and Square Edged Wood Flooring
...more info
Sub Floors and their inherent problems for wood flooring
...more info
Technical Specification Documents
...more info
EAZY FIT Parquet Flooring fitting costs
...more info
Wood Floors and Under Floor Heating
...more info
Fitting Wood Floors beneath Skirting Boards
...more info
American Black Walnut supplied oiled and fitted by The Solid Wood Flooring Company
...more info
Unfinished Wood Flooring
Natural Light Oak Floor » Unfinished Wood Flooring »  Unfinished Oak Floor 189mm Wide

Unfinished Oak Floor 189mm Wide ( E175UF )


This is a Prime Grade Oak (AB), and therefore will contain very few knots. Please call 01666 504015 for more information.
Width: 189mm Straight Edge
Thickness: 15mm Tongue and Groove 4 Sides
Top Layer: 4mm Solid Oak
Base layer: 11mm thick with Poplar middle
Length: 1860mm with one board per carton split
Quantity per Carton:2.109m2 Per Carton
Finish: Unfinished
Applications: Home, Office, Pubs, Clubs and Commercial use

Floor Fitting Options
Nailing:Secret Nailing or Secret Screws
Gluing: Glued to the subfloor using the BONA R850
Floating:Floated over an underlay such as Timbermate Excel
Underfloor Heating:This floor is suitable to be layed over underfloor heating

There are a huge range of finishes available for the E175UF and other unfinished oak floors..

You can use our unfinished accessories such as the stair nosing and end mouldings with these boards. To see the colours and finishes you can create on this board and any of our other unfinished wood floors once it is fitted, please see details of the WOCA oils and Blanchon oils and hard waxes below.
 


 Unfinished Oak Floor 189mm Wide



We supply real wood flooring at truly economical prices and deliver Nationwide including Europe and Ireland. Our sandwich engineered oak floors are unique in their construction. As the grain of the middle layer goes in the opposite direction of the top and bottom layer it means that the board is stable and will remain so in almost any location. This is more stable than plywood backed wooden flooring where the material is a different species and will therefore move differently over very wide board widths. Plywood backed engineered boards are fine for up to 260mm widths.  

This is an unfinished floor and we recommend the range of WOCA natural Oils for finishing:

You can finish this board using our WOCA Master Oil which we supply. The WOCA oxidising Master oil is a penetrating wood oil system. The master oil actually penetrates the surface, compared to other oils surface oil and lacquer type building systems. The master oil actually cures within the wood, hardens and protects the floor leaving a beautiful natural open pore surface. WOCA master oil treatment oils were the choice for the very high traffic Eurostar project in St Pancras which was opened by the Queen in November 2007.

 

Engineered wooden flooring boards are used in environments where stability is required and moisture could be prevalent, but it must not exceed 10%. For example you should use these on new concrete floors subject to the correct moisture level, over garages, basements etc. Due to the cross ply structure, these boards will not move like solid wood.