Fitting Wood Floors beneath Skirting Boards
...more info

Micro Bevel and Square Edged Wood Flooring
...more info

EAZY FIT Parquet Flooring fitting costs
...more info

Technical Specification Documents
...more info

Installing Underfloor heating and Wood floors
...more info

Parquet Wood Flooring for use with underfloor heating


Adhesives For Engineered Wood Flooring
...more info

Personal Quotation for Wood Flooring and Hardwood Flooring
...more info

WOCA Oils from Wood Care Denmark with Natural Oil
...more info

Sub Floors and their inherent problems for wood flooring
...more info

Unfinished Wood Flooring

Unfinished White Oak Floor 150mm Wide ( DIAMOND-E303LN )


This wooden floor can be mixed with E120, E150 and E157 to give different width and length effects, the grading is ABC. Call 01666 504015 for more information.


Width: 150mm with a square edge
Thickness: 20mm tongue and groove all 4 sides
Top Layer: 4mm solid oak
Base layer: 16mm thick 9 layers of cross grain plywood
Length: 1830mm some cartons will have a split board
Quantity per Carton:1.647 m2 and 5 layers
Finish: Unfinished with knots not filled
Applications: Home, Office, Pubs, Clubs and Commercial use

Floor Fitting Options
Nailing:Secret Nailing or Secret Screws
Gluing: Use the Bona R850 adhesive to glue directly to screed or floors
Floating:On an underlay where the tongue and grooves are glued together
Underfloor Heating:Is suitable but always glue to the screed if possible

You can use our unfinished accessories such as the stair nosing and end mouldings with these boards. To see the colours and finishes you can create on this board and any of our other unfinished wood floors once it is fitted, please see details of the WOCA oils and Blanchon oils and hard waxes below.
 

Unfinished White Oak Floor 150mm Wide



We supply real wood flooring at truly economical prices and deliver Nationwide including Europe and Ireland. Our engineered boards are not like the cheap versions where there are just two thin layers of birch and a thick centre layer of softwood like pine or poplar. The Engineered wooden flooring does not need to be acclimatised like solid wood and can be laid immediately after delivery.

 All our Amethyst engineered boards have multi cross ply layers with Birch for strength and stability and are structural boards which means they can be laid directly over joists. The boards are tongue and groove all round. Our Engineered boards look like solid boards but are much stronger due to their structure and the manufacturing process we use.

This is an unfinished floor and we recommend the range of WOCA Natural Oils or the Blanchon Hard Waxoils and Oils for finishing:

 

For further details and information on how to finish and apply WOCA Natural Oils or the Blanchon Hard Waxoils and Oils please click this link:-

 

Treating our Unfinished Oak Boards

 

Engineered wooden flooring boards are used in environments where stability is required and moisture could be prevalent, but it must not exceed 10%. For example you should use these on new concrete floors subject to the correct moisture level, over garages, basements etc. Due to the cross ply structure, these boards will not move like solid wood.