Wood Flooring Finishes

This guide explains our factory prefinished Floor finishes and the products we use to ensure a trouble free floor. The final finish will depend on your personal taste but as we use industrial strength lacquers our floors will stand up to most situations. If you want a higher gloss then you can use the Bona Polish Gloss product which you can apply with the Bona Micro Fibre applicator pad found in the Bona maintenance kits. We have three main finishes as follows and all are applied under strict factory and quality control procedures which will ensure a perfect floor. Full details of each company's products can be seen in the relevant PDF files in the Floor Finishing section.

Diamond Range lacquered Floors one of the hardest finishes available We use the Bona Natural for industrial applications and apply 9 coats. The process is as follows and we have quoted the product codes for clarification:

1. One coat of UV Primer UW0310 this gives good adhesion and is cured using IR drying Lamps
2. Three coats of UV curing light filler UL0115 giving high abrasion resistance
3. One coat of UV Base coat (anti-scratch) UB0135 cured with a UV lamp
4. One coat of Bona Natural base coat UB8128 cured with a UV lamp
5. One coat of UV Base coat UB0123 cured with a UV lamp
6. Two coats of Bona Natural Top coats UT8098 cured with Mercury lamps and this top coat has a high resistance to scratching due to its industrial strength. This finish is harder wearing than Bona Traffic and will last longer and is more scratch resistant.

Amethyst and Sapphire Range Lacquered Floors one of the toughest finishes available For this range we use Treffert lacquers and apply 9 coats. The process is as follows

1. UV-PU INSULATION COAT 4713310000404
2. UV-Sealer Sandable for the back board 6613390000403
3. UV-FILLER TRANSPARENT PUMPABLE 6113330000403
4. UV-Duro Sealer (standard) 6613470000403
5. UV-Sealer Transparent 6613360000403
6. UV-Duro Sealer(standard) 6613470000403
7. UV-Sealer Sandable Colourless 6613330000403
8. HPC Anti Scratch Topcoat 6513341000403
9. HPC Anti Scratch Topcoat 6513341000403

Natural Oiled Floors all Ranges We use the WOCA Woodcare Denmark products for all our oiled floors and apply 2 coats at the factory. You can then use the master Oils to give the floor a deeper finish using a polishing mop and patina discs after it has been laid. We supply the WOCA maintenance oil and oil soap for cleaning.

UV Oiled Floors all Ranges We apply 3 coats at the factory and cure using infra red heat to ensure a very hard wearing surface that can easily be repaired. We use the WOCA UV oil and also supply maintenance kits with paste and soap oil for cleaning.