Samples: 0
01666 504015 or Email Us
Talk to us: 01666 504015 or Email Us

Lightly Fumed & Smoked Oak Flooring with a Raw Timber Finish | E210T

FSC® Certified Flooring
TimberOak
Width190mm
Thickness15mm
Length1900mm
ColourDark,Fumed,Grey
FinishOiled,Raw Timber
Base Layer11mm Crossply Hardwood
Top Layer4mm
EdgesMicro Bevelled
UFHSuitable for Under Floor Heating
  • Fitted Product Photo

Click here to view Wood Floor Finishes From The Solid Wood Company PDF



E210T is a thinner version (and therefore more economical and environmentally friendly) of our E210 oak flooring. E210T is still suitable for use with under floor heating, is FSC certified and responsibly sourced. We've kept the extremely hard wearing Raw Timber oil finish to give you peace of mind that this floor is suitable for use in busy domestic or commercial properties. Enviro Raw Timber and Original Wood Environment are special finishes that do not change the colour of the wood when applied and they have an exceptionally mat finish when applied on line at the factory. This means it is a requirement after installation to clean thoroughly with the correct product and then apply one coat of the original wood environment with a roller. No buffing is required and it will dry in 4 hours subject to the cleaning being done in accordance with the instruction leaflet that you can Download Here

Click Here to view the Cleaning Enviro Wood Floors Document

If the recommended cleaning and maintenance products are not used then the Solid Wood Flooring Company cannot be held responsible for any deterioration or lack of durability of the finish of the floor. Some propriety cleaners can contain chemical and other substances like alcohol, that can damage the surface and finish, especially on oiled floors.

To keep your floor looking good after installation, and the initial clean with natural soap, make sure you use felt pads on all chairs, sofas and table legs. For regular cleaning you should just use a micro fibre mop and/or soft brush vacuum cleaner (not one that has a rotating brush) as these generally have a plastic underside that can cause damage to a floor. You only need to use the natural soap and maintenance oil when the floor starts to look dry or lacks "lustre".

These are the correct products to buy and use on this on this floor. Call 01666 504015 or

Buy Online here

05770006

Original Wood Environment Maintenance Oil

Water-based wood floor maintenance oil for impregn...

01910024

Blanchon Powerful Cleaner

Blanchon Powerful Cleaner should only be used t...

5127107

Blanchon Natural Soap Colourless

Natural Soap M...

BLN Enviro

Blanchon Environment - Bare Timber

A Finishing Oil that Keeps the Natural Unfinished ...

  • Fitted Pictures
  • Fitted Product Photo
  • Product Info

Click here to view Wood Floor Finishes From The Solid Wood Company PDF



E210T is a thinner version (and therefore more economical and environmentally friendly) of our E210 oak flooring. E210T is still suitable for use with under floor heating, is FSC certified and responsibly sourced. We've kept the extremely hard wearing Raw Timber oil finish to give you peace of mind that this floor is suitable for use in busy domestic or commercial properties. Enviro Raw Timber and Original Wood Environment are special finishes that do not change the colour of the wood when applied and they have an exceptionally mat finish when applied on line at the factory. This means it is a requirement after installation to clean thoroughly with the correct product and then apply one coat of the original wood environment with a roller. No buffing is required and it will dry in 4 hours subject to the cleaning being done in accordance with the instruction leaflet that you can Download Here

  • Maintenance

Click Here to view the Cleaning Enviro Wood Floors Document

If the recommended cleaning and maintenance products are not used then the Solid Wood Flooring Company cannot be held responsible for any deterioration or lack of durability of the finish of the floor. Some propriety cleaners can contain chemical and other substances like alcohol, that can damage the surface and finish, especially on oiled floors.

To keep your floor looking good after installation, and the initial clean with natural soap, make sure you use felt pads on all chairs, sofas and table legs. For regular cleaning you should just use a micro fibre mop and/or soft brush vacuum cleaner (not one that has a rotating brush) as these generally have a plastic underside that can cause damage to a floor. You only need to use the natural soap and maintenance oil when the floor starts to look dry or lacks "lustre".

These are the correct products to buy and use on this on this floor. Call 01666 504015 or

Buy Online here

05770006

Original Wood Environment Maintenance Oil

Water-based wood floor maintenance oil for impregn...

01910024

Blanchon Powerful Cleaner

Blanchon Powerful Cleaner should only be used t...

5127107

Blanchon Natural Soap Colourless

Natural Soap M...

BLN Enviro

Blanchon Environment - Bare Timber

A Finishing Oil that Keeps the Natural Unfinished ...

  • NBS Specification

Not quite right?  We can make wood flooring in any finish or colour.