- European Oak brushed textured Oak look.
- Mineral-based core made up of magnesium oxide (MGO core) reinforced with tough fibreglass for stability and durability means it is fireproof, as magnesium oxide is used in furnace linings and crucibles.
- Waterproof. Fire Proof. Dent Proof. Shift Proof and Mould Proof.
- Environmentally sustainable.
- Waterproof IXPE backing so no underlay needed.
MGO is made up of 100% minerals widely used in the construction industry and is recognised as safe, stable and resistant to fire, water mould and denting. There is no need for any transition gaps (expansion) for areas up to 30 metres x 30 meters
- Water Resistant: the rigid core helps to prevent warping when exposed to moisture, this means you can install in virtually any conditions, especially bathrooms and basements.
- Fire Resistance: the stone composite rigid core is fire resistant.
- Durability: good at resisting damage form impacts like high heels and heavy objects.
- Stability: the high-density stone core makes this flooring more resistant to expanding and contracting than other floors:
- Easy Installation: The Valinge 5Gi push-fit system makes the Impervia® floor a DIY solution, and with the IXPE backing it means you can install directly over most existing floors, such as old wood, stone and ceramic tiles etc.
- Price: This flooring is cheaper than real wood and softer to walk on.
1524 x 180 x 6.5mm (5mm plank + 1.5mm IXPE backing) 10 pieces per carton = 2.76 m2
1524 x 228 x6.5mm (5mm plank + 1.5mm IXPE backing) 6 pieces per carton = 2.086 m2
1824 x 228 x6.5mm (5mm plank + 1.5mm IXPE backing) 6 pieces per carton = 2.5 m2
To become a distributor of Impervia Luxury Vinyl Flooring click here
- ConstructionComposite stone centre, IXEP backing with Vinyl top layer. Read more about the durability of Impervia Flooring here
- PEFC Certified
- Suitable for underfloor heating
Further documentation for this product.
Recommended ProductsView All Products
Flooring FAQ'sView All FAQ's
I HAVE UNDERFLOOR HEATING
Any type of underfloor heating system must be tested and commissioned before you consider installing any timber floor. You then turn it off before installing any floor.
I HAVE A VOID UNDER MY OLD FLOORBOARDS AND WANT TO INSTALL NEW FLOORING ABOVE
The best way is to remove the old floorboards and then check the joist and the base floor and make sure that the bricks or other method of allowing air to circulate underneath as free form debris and other obstacles. You can then add insulation between the joists using “hangers” and then fix a 20mm structural board direct to the joists. An alternative method is to screw marine plywood to the joists and then fully bond a 15mm engineered board which can also be herringbone or chevron. Parquet herringbone and chevron cannot be fitted to joist as it needs a plywood or chipboard subfloor.
CAN I PUT WOOD FLOORING IN A KITCHEN/BATHROOM?
Yes, wood flooring can be fitted in any part of your home. Remember that wood flooring is a natural product and will react differently compared to man-made or stone tile options. Discuss care and maintenance advise with our experts prior too fitting in high spillage areas.
WHAT DOES CHARACTER MEAN?
The term character can be applied in two ways with wood flooring. The first is referring to the aesthetic properties of the wood e.g. grain pattern, knots etc… the ‘character’ of the timber. The other meaning of this term is as a grade description, i.e. ‘Character Grade’ this denotes a way to visualise the grading specification. Character grade usually has a wider grain, with larger and more frequent knots permissible than a ‘select’ grade, but not as much as a ‘rustic’ grade.
HOW LONG BEFORE I HAVE TO SAND IT AND RE FINISH?
This will depend on a number of factors unique to where the flooring is fitted. Typically, if the floor is well maintained and cleaned with the correct products, the finish should last for many years, possibly a lifetime depending on usage. If a wood floor has not been properly maintained or is in a very heavy use environment, then you need to watch out for indicators that the finish is in need of maintenance. These indicators are typically: • How quickly the wood floor is getting dirty/how easy it is to clean any soiling off? • Does the wood feel rough? (not application to band sawn flooring) • Does the floor look patchy? • Has a chemical cleaner been used or spilt on to the floor? If the answers to these questions are that it is hard to clean and looks/feels rough/patchy then it might be time to consider re-oiling. It is always best to get in touch with us first to discuss and sanding may not be required.
Questions or comments? If you can’t find the answer to your question on our site or want to leave some feedback, please fill in the form below.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.