Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
  • Load image into Gallery viewer, Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
  • Load image into Gallery viewer, Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
  • Load image into Gallery viewer, Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
  • Load image into Gallery viewer, Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)
  • Load image into Gallery viewer, Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)

Smooth Snow UV Oiled Oak Flooring | TW-E118 (190)

Product Code: TW-E118 (190)

Free samples of the Smooth Snow UV Oiled Oak FSC Certified Flooring is available at The Solid Wood Flooring Company.

Close Icon
  • Colour
    Colour Light, White
  • Thickness
    Thickness 15mm
  • Edges
    Edges Micro Bevelled
  • Under Floor Heating
    Under Floor Heating Suitable for Under Floor Heating
Product Information

Carton Size: 2.89m2

Please note: Each Carton contains 8 boards. 2 Layers may be may be split to allow for staggering the joints and can also be used as end of runs. Please see 
The Art of Fitting Wood Floors which briefly explains how to create a stunning floor.

Order Free Samples

Free Samples Straight to your door

Our free samples are free of charge and easy to order, get a true representation of your chosen flooring now.

Order Free Sample
Contact Us

If we don’t have it we can make it for you

Subject to minimum quantities OF 500 m2

Contact Us

Flooring FAQ's

View All FAQ's

I HAVE UNDERFLOOR HEATING

Any type of underfloor heating system must be tested and commissioned before you consider installing any timber floor. You then turn it off before installing any floor.

I HAVE A VOID UNDER MY OLD FLOORBOARDS AND WANT TO INSTALL NEW FLOORING ABOVE

The best way is to remove the old floorboards and then check the joist and the base floor and make sure that the bricks or other method of allowing air to circulate underneath as free form debris and other obstacles. You can then add insulation between the joists using “hangers” and then fix a 20mm structural board direct to the joists. An alternative method is to screw marine plywood to the joists and then fully bond a 15mm engineered board which can also be herringbone or chevron. Parquet herringbone and chevron cannot be fitted to joist as it needs a plywood or chipboard subfloor.

CAN I PUT WOOD FLOORING IN A KITCHEN/BATHROOM?

Yes, wood flooring can be fitted in any part of your home. Remember that wood flooring is a natural product and will react differently compared to man-made or stone tile options.  Discuss care and maintenance advise with our experts prior too fitting in high spillage areas.

WHAT DOES CHARACTER MEAN?

The term character can be applied in two ways with wood flooring.  The first is referring to the aesthetic properties of the wood e.g. grain pattern, knots etc… the ‘character’ of the timber. The other meaning of this term is as a grade description, i.e. ‘Character Grade’ this denotes a way to visualise the grading specification. Character grade usually has a wider grain, with larger and more frequent knots permissible than a ‘select’ grade, but not as much as a ‘rustic’ grade.

HOW LONG BEFORE I HAVE TO SAND IT AND RE FINISH?

This will depend on a number of factors unique to where the flooring is fitted. Typically, if the floor is well maintained and cleaned with the correct products, the finish should last for many years, possibly a lifetime depending on usage. If a wood floor has not been properly maintained or is in a very heavy use environment, then you need to watch out for indicators that the finish is in need of maintenance. These indicators are typically: • How quickly the wood floor is getting dirty/how easy it is to clean any soiling off? • Does the wood feel rough? (not application to band sawn flooring) • Does the floor look patchy? • Has a chemical cleaner been used or spilt on to the floor? If the answers to these questions are that it is hard to clean and looks/feels rough/patchy then it might be time to consider re-oiling. It is always best to get in touch with us first to discuss and sanding may not be required.

Contact Us

Contact Us

Questions or comments? If you can’t find the answer to your question on our site or want to leave some feedback, please fill in the form below.